Unfortunately, accidents regularly happen in the workplace. The good news is that you can take steps to prevent this from happening. Following specific steps can help reduce the risks involved. If you’re serious about protecting your workers, you should begin taking these steps to ensure that your employees are going to be okay. When one of your workers gets hurt, you’re going to be responsible for the costs. Prevent this from happening by using the advice below.
A1 Denver Commercial Refrigeration Repair
Make Sure The Floor Is Dry
First, you should go above and beyond to ensure that the floor remains dry. If the floor gets wet, it is likely going to be slippery. A slippery floor could lead to a devastating fall. Your employee might bump his or her head. You’ll also have to worry about ice developing on the ground. It is pertinent to get rid of the slippery surface by removing the ice and drying the floor. You can scrape away the ice before cleaning it up. You’ll also want to use a squeegee to get rid of the excess water.
Use the squeegee to push the water toward the drain. Keeping your floor dry will greatly reduce the likelihood that someone is going to get hurt when walking inside your walk-in cooler.
Always Check The Safety Releases
Remember that someone could get stuck in the cooler at any point. When you’re busy, you’re going to find yourself running around. You may mistakenly close the door and lock yourself inside. Unfortunately, this happens often. Therefore, you need to make sure that you can escape the cooler. The best way to do that is by using the door’s safety release. Otherwise, you might get stuck inside and develop hypothermia. Getting stuck in your cooler could be deadly. Check the safety releases regularly to ensure that they’re working correctly.
After you’ve done that, you can rest assured knowing you’ll be able to get out without delay.
Clean The Unit Often
Another thing to do is to make sure that the unit is cleaned regularly. Although you have to worry about falls, you also need to worry about your respiratory health. If you let mold develop in your freezer, you’re going to encounter major issues. You’ll find yourself breathing in those harmful spores. Therefore, you don’t want this to happen. You need to prevent mold from growing in your walk-in cooler. Cleaning the unit regularly can help reduce the risk of this happening.
Never Store Too Much On The Shelves
Before going any further, you should take steps to ensure that your shelves are not overloaded. If you add too many items to the shelves, you might cause the shelf to fall. It might be too heavy. The shelf won’t be able to support the extra weight. Find out how much weight the shelves can support without overloading them. If necessary, store items elsewhere. Don’t put heavy items at the top because they’ll be dangerous to pull down later.
Provide Adequate Gear
Finally, you should make sure that you have adequate gear. When you enter the freezer, you’re going to be exposed to extremely cold temperatures. Therefore, it is pertinent to wear gloves and a coat. Your head might get cold too. Wearing a hat is a good idea too. Regardless, you need to make sure that you’re going to be warm when you have to work in the walk-in freezer. Wearing the right clothes can help.
Using the advice above can make a big difference. It’ll help ensure that your workers are going to be safe when they enter your
walk-in coolers. Use this information to protect your customers and yourself.
